Installation Manual

0103-0767
3” ROUND TUBE
1. Remove all contents from the package and
check stainless steel tubes for any damage.
Also, verify that all components and hardware
listed above are included before you begin
installation.
Begin on driver side of vehicle.
1
Components:
Driver Side
Step Bar
Qty 1
Passenger Side
Step Bar
Qty 1
Hardware:
M14 Flat Washers
Qty 4
M14 Lock Washers
Qty 4
M14 x 60 mm
Hex Head Bolts
Qty 4
13MM SOCKET 6MM HEX BIT
RATCHET
TORQUE
WRENCH
Tools Required:
Torque Specifications:
For Rocker Panel Mount Installations
M8 through M12 bolts and nuts are set to 15-20 ft lbs.
Note: When installing the brackets and bars, all hardware must be left loose until all the items are attached.
M10 x 30mm Button
Head Bolt
Qty 2
M8 Hex Head Nut
Qty 18
Driver Side
Front Bracket
Qty 1
Rev 5
0103-0767
22MM SOCKET
Plastic Washers
Qty 18
1
Driver’s Side
M10 Flat Washers
Qty 2
M10 Lock Washers
Qty 2
Rubber Gasket
Qty 2
Driver Side
Center Bracket
Qty 1
Passenger Side
Center Bracket
Qty 1
Driver Side
Rear Bracket
Qty 1
Passenger Side
Front Bracket
Qty 1
Passenger Side
Rear Bracket
Qty 1
M8 Flat Washers
Qty 18
M8 Lock Washers
Qty 18