Installation Manual

3 0402-0130, 0402-0130B
Rev 6
7. Fasten the Front Support Brace to the M10 Bolt Plate as shown. Secure using one (1) M10
Lock Washer, one (1) M10 Flat Washer and one (1) M10 Hex Head Nut (7a). Repeat this
procedure for the Rear Support Brace (7b).
7b
7a
M10 STUD ON
M10 BOLT PLATE
M10 LOCK WASHER
M10 HEX HEAD NUT
M10 FLAT WASHER
FRONT SUPPORT
BRACKET
M10 STUD
ON
M10 BOLT
PLATE
M10 LOCK WASHER
M10 HEX HEAD NUT
M10 FLAT WASHER
FOR M10 BOLT PLATE
INSTALLATION
M8 STUD
ON
M8 BOLT
PLATE
M8 LOCK WASHER
M8 HEX HEAD NUT
M8 FLAT WASHER
FOR M8 BOLT PLATE
INSTALLATION
REAR SUPPORT
BRACKET