Installation Manual

0402-0130, 0402-0130B
8. Attach the Front Support Brace to the Front Bracket using one (1) M10 Lock Washer, two
(2) M10 Flat Washers, one (1) M10 Hex Head Nut, and one (1) M10 X 30MM Hex Head Bolt
(8a). Repeat this procedure for attaching the Rear Support Brace to the Rear Bracket (8b).
8a
8b
M10 HEX HEAD NUT
M10 LOCK WASHER
M10 FLAT WASHER
Front
M10 FLAT WASHER
M10 X 30MM
HEX HEAD BOLT
M10 HEX HEAD NUT
M10 LOCK WASHER
M10 FLAT WASHER
M10 FLAT WASHER
M10 X 30MM
HEX HEAD BOLT
FRONT SUPPORT BRACKET
ALREADY ATTACHED
TO ROCKER PANEL IN STEP 7
REAR SUPPORT BRACKET
ALREADY ATTACHED
TO ROCKER PANEL IN STEP 7
Rev 6