Installation Manual

ManualsBrandsRaptor Series ManualsAutomotiveRaptor Series 0701-0020MB (00-17) Chevy Silverado/GMC Sierra 1500/2500/3500 Crew Cab (w/DEF Tank) 4" Black Oval Steps

Your satisfaction is important to us, please let us help!

If you have any questions or concerns during the installation, our support representa-

tives are available to assist you.

Please call: 1-877-769-3765 or Live Chat at www.raptorseries.com

If you have damaged or missing parts please contact the company you purchased the

product from and notify them of the issue right away.

CAUTION: Do not install damaged parts!!!

Raptor Series Truck Accessories| 1489 Salmon Way, Hayward, CA 94544 | P:877.769.3765 | F: 877.875.7446 | E: sales@raptorseries.com

Summary of content (8 pages)

PAGE 1
Your satisfaction is important to us, please let us help! If you have any questions or concerns during the installation, our support representatives are available to assist you. Please call: 1-877-769-3765 or Live Chat at www.raptorseries.com If you have damaged or missing parts please contact the company you purchased the product from and notify them of the issue right away. CAUTION: Do not install damaged parts!!! Raptor Series Truck Accessories| 1489 Salmon Way, Hayward, CA 94544 | P:877.769.
PAGE 2
Easy Return / Easy Exchange Want to return an item or exchange? Not satisfied with purchase? No problem. We strongly believe in service after the sale and we stand behind our products and our service to you, our valued customer. There is no problem we can’t solve for you! Items that have been installed and/or damaged after receipt, are no longer in new and ready-to-sell condition and cannot be refunded, replaced or exchanged unless it has a manufacturer defect or was damaged in shipping.
PAGE 3
Raptor Series Warranty LIMITED TEN (10) YEAR WARRANTY For Powder Coated Steel Products CYC Engineering, Inc. guarantees the original purchaser of our products a limited ten (10) year warranty from the date of original purchase against manufacturer defects in materials, workmanship and finish under normal use. The step pads are covered under warranty for 1 year.
PAGE 4
Rev 5 0701-0020M, 0701-0020MB 4” OVAL BAR Components: Hardware: Driver Side Bar Qty 1 M10 x 30MM Hex Head Bolt Qty 2 Rear Bracket Qty 2 Support Braces Qty 2 Passenger Side Bar Qty 1 Front Bracket Qty 2 Rubber Gasket Qty 6 Center Bracket Qty 2 U-Bolt Qty 2 M10 x 30 mm Button Head Bolts Qty 12 M10 Lock Washer Qty 12 M10 Flat Washer Qty 14 M10 Flange Lock Nuts Qty 6 Tools Required: RATCHET TORQUE WRENCH 17MM SOCKET 14MM SOCKET 6MM HEX BIT Torque Specifications: For Cab Mount Installations C
PAGE 5
4. Install the Front, Center and Rear Brackets by using the Existing Cab Mount Bolts that you Rev 5 removed in step 3. Note: Make sure factory bushing is put on the same way it is taken off. 4 4 nt o r F FRONT BRACKET 4 nt o r F CENTER BRACKET nt o r F VEHICLE FRAME REAR BRACKET CAB MOUNT BOLT CAB MOUNT BOLT CAB MOUNT BOLT 5. Insert the U-Bolt into the larger of the two holes found in the Rocker Panel above the Center Bracket.
PAGE 6
Rev 5 6. Loosely attach the Support Brace to the U Bolt using two (2) M10 Flange Lock Nuts. 7. Fasten the Support Brace to the Center Bracket using one (1) M10 x 30MM Hex Head Bolt, one (1) M10 Flat Washer and one (1) M10 Flange Lock nut. 7 Fro nt 6 SUPPORT BRACE DO NOT OVERTIGHTEN CENTER BRACKET M10 FLANGE LOCK NUT M10 FLAT WASHER M10 X 30MM HEX HEAD BOLT FLANGE LOCK NUT 8. Place the Step Bar and the Rubber Gaskets onto the Brackets as shown. 9.
PAGE 7
Rev 5 ADDENDUM For 2014 Current Chevy/GMC Crew Cab 1500 Model Place Spacer Washers as shown in the diagram below. DO NOT use pneumatic or electric impact on Cab Mount Bolts. Front Bracket Center Bracket Rear Bracket nt Fro nt Fro nt Fro SPACER WASHER FACTORY WASHER FACTORY WASHER FRONT BRACKET SPACER BLOCK VEHICLE FRAME FACTORY WASHER CENTER BRACKET REAR BRACKET CAB MOUNT BOLT CAB MOUNT BOLT Step 7 Alternate Use the Support Brace Extention if the Support Brace is not long enough.
PAGE 8
Rev 5 ADDENDUM For 2015 Current Chevy/GMC Crew Cab 2500-3500 Model Place Spacer Washers as shown in the diagram below. DO NOT use pneumatic or electric impact on Cab Mount Bolts.