Owner's manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Accessing CC-SG
- Chapter 3: Configuring CC-SG with Guided Setup
- Chapter 4: Creating Associations
- Chapter 5: Adding Devices and Device Groups
- Chapter 6: Configuring Nodes and Interfaces
- Chapter 7: Adding and Managing Users and User Groups
- Chapter 8: Policies
- Chapter 9: Configuring Remote Authentication
- Chapter 10: Generating Reports
- Audit Trail Report
- Error Log Report
- Access Report
- Availability Report
- Active Users Report
- Locked Out Users Report
- User Data Report
- Users in Groups Report
- Group Data Report
- AD User Group Report
- Asset Management Report
- Node Asset Report
- Active Nodes Report
- Node Creation Report
- Query Port Report
- Active Ports Report
- Scheduled Reports
- CC-NOC Synchronization Report
- Chapter 11: System Maintenance
- Chapter 12: Advanced Administration
- Appendix A: Specifications (G1, V1, and E1)
- Appendix B: CC-SG and Network Configuration
- Appendix C: User Group Privileges
- Appendix D: SNMP Traps
- Appendix E: Troubleshooting
- Appendix F: Two-Factor Authentication
- Appendix G: FAQs
- Appendix H: Keyboard Shortcuts

APPENDIX A: SPECIFICATIONS 211
Appendix A: Specifications (G1, V1, and E1)
G1 Platform
General Specifications
Form Factor
1U
Dimensions (DxWxH)
22.1”x 17.32” x 1.75” 563mm x 440mm x 44mm
Weight
24.07lb (10.92kg)
Power
Redundant, hot-swappable power supplies, auto-sensing
110/220 V – 2.0A
Mean Time Between Failure
(MTBF)
38,269 hours
KVM Admin Port
(DB15 + PS2 Keyboard/Mouse)
Serial Admin Port
DB9
Console Port
N/A
Hardware Specifications
Processor
Intel
®
Pentium
®
III 1 GHz
Memory
512 MB
Network Interfaces
(2) 10/100 Ethernet (RJ45)
Hard Disk & Controller
(2) 40-GB IDE @7200 rpm, RAID 1
CD/ROM Drive
CD/ROM 40x Read Only
Environmental Requirements
OPERATING
Humidity
20% - 85% RH
Altitude
Operate properly at any altitude between 0 to 10,000
feet, storage 40,000 feet (est.)
Vibration
5-55-5 HZ, 0.38mm, 1 minutes per cycle; 30 minutes for
each axis (X, Y, Z)
Shock
N/A
NON-OPERATING
Temperature
0 - 30 deg C; 32 – 104 deg F
Humidity
10% - 90% RH
Altitude
Operate properly at any altitude between 0 to 10,000
feet, storage 40,000 feet (est.)
Vibration
5-55-5 HZ, 0.38mm, 1 minutes per cycle; 30 minutes for
each axis (X, Y, Z)
Shock
N/A