Owner's manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Accessing CC-SG
- Chapter 3: Configuring CC-SG with Guided Setup
- Chapter 4: Creating Associations
- Chapter 5: Adding Devices and Device Groups
- Chapter 6: Configuring Nodes and Interfaces
- Chapter 7: Adding and Managing Users and User Groups
- Chapter 8: Policies
- Chapter 9: Configuring Remote Authentication
- Chapter 10: Generating Reports
- Audit Trail Report
- Error Log Report
- Access Report
- Availability Report
- Active Users Report
- Locked Out Users Report
- User Data Report
- Users in Groups Report
- Group Data Report
- AD User Group Report
- Asset Management Report
- Node Asset Report
- Active Nodes Report
- Node Creation Report
- Query Port Report
- Active Ports Report
- Scheduled Reports
- CC-NOC Synchronization Report
- Chapter 11: System Maintenance
- Chapter 12: Advanced Administration
- Appendix A: Specifications (G1, V1, and E1)
- Appendix B: CC-SG and Network Configuration
- Appendix C: User Group Privileges
- Appendix D: SNMP Traps
- Appendix E: Troubleshooting
- Appendix F: Two-Factor Authentication
- Appendix G: FAQs
- Appendix H: Keyboard Shortcuts

APPENDIX A: SPECIFICATIONS 213
E1 Platform
General Specifications
Form Factor
2U
Dimensions (DxWxH)
27.05”x 18.7” x 3.46”—687 mm x 475 mm x 88 mm
Weight
44.09 lbs—20 kg
Power
SP502-2S Hot-Swappable 500W 2U power supply
Operating Temperature
0~50 degree C
Mean Time Between Failure
(MTBF)
53,564 hours
KVM Admin Port
PS/2 keyboard and mouse ports, 1 VGA port
Serial Admin Port
Fast UART 16550 serial port
Console Port
(2) USB 2.0 Ports
Hardware Specifications
Processor
(2) AMD Opteron 250 2.4G 1MB processors
Memory
4 GB
Network Interfaces
Intel PRO/1000 PT Dual Port Server Adapter
Hard Disk & Controller
(2) WD740ADFD SATA 74GB 10K RPM 16MB cache
CD/ROM Drive
DVD-ROM
Environmental Requirements
OPERATING
Humidity
5-90%, non-condensing
Altitude
Sea level to 7,000 feet
Vibration
10 Hz to 500 Hz sweep at 0.5 g constant
acceleration for one hour on each of the
perpendicular axes X, Y, and Z
Shock
5 g for 11 ms with a ½ sine wave for each of the
perpendicular axes X, Y, and Z
NON-OPERATING
Temperature
-40-70 degree C
Humidity
5-90%, non-condensing
Altitude
Sea level to 40,000 feet
Vibration
10 Hz to 300 Hz sweep at 2 g constant acceleration
for one hour on each of the perpendicular axes X,
Y, and Z
Shock
30 g for 11 ms with a ½ sine wave for each of the
perpendicular axes X, Y, and Z