User Manual

Chapter 1: Introduction

Supported Paragon CIMs

The Dominion KX version 1.4 and higher supports the following CIMs:

• DCIM-PS2 for PS/2 KB/MS

• DCIM-SUN for SUN KB/MS

• DCIM-USBG2 for USB KB/MS (not Sun)

• DCIM-USBG2 for SUN USB KB/MS

• P2CIM-PWR for power strip control

• UUSBPD

• P2CIM-PS2

• P2CIM-SUN

• P2CIM-USB

• P2CIM-SUSB

• UKVMPD

• USKVMPD

Note: There is a small switch on the DCIM-USBG2 that should be set to

the S position for use with SUN Solaris servers.

Supported Keyboard and Mouse Devices

The Dominion KX supports the following on local console devices:

• USB keyboard and USB mouse (two distinct connectors)

• PS/2 keyboard and PS/2 mouse (two distinct connectors)

• PS/2 keyboard with a USB mouse

• USB keyboard with a PS/2 mouse

• Combo USB keyboard/mouse with one USB plug

• USB hubs (up to 3, in any combination)

• PS/2 to USB adapters (in most cases)

• USB to PS/2 adapters (in most cases)

• Keyboards that allow additional USB keyboards, mice, and/or hubs

to be plugged into the keyboard itself (keyboard functions as a hub)

• Various keyboard trays and drawers