User Manual

11
In This Chapter
Configuring Target Servers........................................................................ 11
Configuring Network Firewall Settings .................................................... 19
Physical Connections.................................................................................. 20
Initial Configuration ................................................................................... 23
Multi-Platform Client and Raritan Remote Client.................................... 26
Configuring Target Servers
Before installing the Dominion KX, you must configure any target
servers that will be accessed via the Dominion KX to ensure optimum
performance. Note that the configuration requirements outlined in this
section apply only to target servers, not to the client workstations
(remote PCs) that are used to access the Dominion KX remotely.
Server Video Resolution
Ensure that each target server's video resolution and refresh rate is
supported by the Dominion KX and that the signal is noninterlaced.
Dominion KX supports the following video resolutions:
Resolutions
640x480 @ 60Hz 800x600 @ 56Hz 1024x768 @ 60Hz
640x480 @ 72Hz 800x600 @ 60Hz 1024x768 @ 70Hz
640x480 @ 75Hz 800x600 @ 72Hz 1024x768 @ 75Hz
640x480 @ 85Hz 800x600 @ 75Hz 1024x768 @ 85Hz
720x400 @ 70Hz 800x600 @ 85Hz 1152x864 @ 60Hz
720x400 @ 85Hz 1152x864 @ 70Hz
1152x864 @ 75Hz
1280x960 @ 60Hz
1280x1024 @ 60Hz
Chapter 2 Installation