User's Manual

Chapter 3: Working with Target Servers
104
2. Click Tools > Restore Device Configuration.
Note that device configuration is specific to a particular device and
should not be restored to another device.
Backing Up and Restoring a User Configuration
To back up a device's user configuration:
1. Select the device in the Navigator.
2. Click Tools > Save User Configuration.
To restore a user configuration:
1. Upload a device's archived user configuration by selecting the device
in the Navigator.
2. Click Tools > Restore User Configuration.
Note: Use these commands to easily transfer user and group information
from one device to another.
Broadcast Port
By default, all Raritan devices send data through Port 5000. This network
traffic includes the autodiscovery broadcast. In the case of conflicts or to
deal with firewall issues, you may want to use a different broadcast port.
MPC Broadcast Port
To change the autodiscovery port from the default broadcast
port of 5000:
1. Select the device in the Navigator.
2. Choose Tools > Options. The Options dialog appears.
3. On the Advanced tab, type the new port number in the Port field of
the Broadcast Port section and then click OK.