User's Manual

Chapter 3: Working with Target Servers
80
Shortcut Menu Key Options
Execute any of the commands on the shortcut menu by either choosing
the command in the menu or using a key combination. If you are using a
key combination to execute a command, you will press Ctrl+Left Alt+M
and then press the key on your keyboard that corresponds to the
underlined letter in the shortcut menu. For example, press Ctrl+Left
Alt+M+F to enter full screen mode. See the table below for information
on invoking commands from the shortcut menu using keyboard
combinations.
Note: You must use the Left Alt key on your keyboard when using the
Ctrl+Left Alt combination.
To Press Ctrl+Left Alt+M+
Toggle between Full/Normal screen
mode*
F
Display connection information* I
Display or set connection properties* P
Display or set video settings* V
Refresh the page R
Synchronize mouse Y
Change to/from single/double cursor
mode
S
Send Ctrl+Alt+Del to the target
system
D
Connect Drive T
Connect CD-ROM/ISO Image E
Send Ctrl+Alt+M to the target system N
Exit a dialog or menu without altering
the keyboard state
Esc
* If full screen mode is active, executing this command will automatically
end full screen mode.
Changing the Shortcut Menu Keyboard Combination
To change the keyboard combination, do the following:
1. Choose Tools > Options to open the Options dialog.
2. From the Keyboard Shortcut Menu HotKey drop-down, select the
keyboard combination you want to use to open the shortcut menu.
3. Click OK or Apply.