- Raritan Paragon II User Guide

16 PARAGON II USER GUIDE
Note: If your video image is fuzzy (especially if you are using an LCD flat-panel monitor), you
can adjust the video gain to focus the video image. If the OSUI is not already displayed, activate
it by pressing the Scroll Lock key twice rapidly, then use the numeric keypad’s + and – (plus and
minus) keys to adjust the video image until it appears to be in focus. The P2-EUST provides
manual skew compensation, which will also help improve video quality. Please see Chapter 3:
Operation – User Functions, Manual Video Gain and Automatic Skew Compensation in P2-
EUST for additional information.
B. Press F5 to activate the Administration Menu. Use the Ç and È keys to move the
highlight to the Channel Configuration entry and press ENTER.
Figure 21 Administration Menu
7. The Channel Configuration menu appears. Use the Ç and È keys or TAB to the yellow
highlight in the Name field for the channel port number where you installed the CPU and
press ENTER. The highlight turns light blue.
Figure 22 Channel Configuration Menu of a P2-UMT832M
A. Edit the name (the space turns green when you start typing). Press ENTER when
finished, and press S to save the new name.
B. Press F2 to return to the Selection Menu. Verify that the new name appears in the
Selection Menu.
8. Repeat steps 5 and 6 for each P2CIM-PS2 and CPU you want to connect to the Base Unit’s
channel ports.