- Raritan Paragon II User Guide

CHAPTER 3: OPERATION – USER FUNCTIONS 35
left SHIFT key, Caps Lock, Num Lock (the default), and “None” (no Previous Channel
Key; function disabled). Use any of the arrow keys to switch between the choices. You
cannot select the key currently being used as the Hotkey (see above).
• Help: This parameter determines the format of the help message at the bottom of each OSUI
menu. It is always set to “Single Line” and cannot be selected or altered.
• Local PC: Use any of the arrow keys to toggle Local PC Mode On or Off (the default) for
the attached User Station. Turn PC Mode “On” only if you have used a Z-CIM
to attach a
local PC between the User Station and the Base Unit.
You can change, delete, or reinstate your password (if “Allow Blank Password” is set to “Yes”)
while the User Profile Menu is on-screen by pressing P. Type your old password at the first
prompt. Type a new password up to eight characters long at the next prompt, and press ENTER.
To delete your password, press ENTER without typing anything in the field. Confirm the new
password by typing it again at the third prompt; then either press ENTER to save the new
password or ESC to abort the change and continue using the old password.
Note: Be careful when you change your password. If you forget or lose it, the Administrator has
no way of recovering or erasing it – your account will have to be deleted and recreated.
Figure 37 Prompt in Message Bar to Save Changes
Help Menu
When the OSUI is open, activate the Help Menu by pressing F1. This menu displays a list of the
function keys and their help functions.
Figure 38 Help Menu