- Raritan Paragon II User Guide

CHAPTER 4: OPERATION – ADMINISTRATOR FUNCTIONS 53
System Reset
To reset the Device Name, Network Settings, User Profiles, System Configuration, and Channel
Configuration, returning them to the original factory default values, without having to physically
go to each switch to reset it, select option 6, System Reset Settings, from the Administration
Menu. You can reset one, several, or all system settings in any combination.
Figure 51 System/Device Reset Screen
1. On the System/Device Reset menu, press Ç, È, or TAB to move to the field you want to
reset.
2. Press ENTER, and then press the arrow keys or the Page Up and Page Down keys to toggle
between Yes and No. When finished, press ENTER.
3. When finished, press the letter O on your keyboard.
4. The message bar will ask you to confirm the System Reboot command. You must type Y-E-
S, the complete word ‘Yes,’ and press ENTER to confirm, or press ESC to cancel.
5. The UMT logs off all local users, disconnects all connections, and then sends a Ready-to-
Reset report to all Paragon clients. After the reset is complete, the Paragon clients can log in
again.