User's Manual

USING WEB BROWSER
1. On any workstation with network connectivity to your Dominion KX, and with Java Runtime Environment 1.4.x (or later) installed, launch a
Web browser and enter the URL, http://
IP-ADDRESS/admin, where IP-ADDRESS is the IP address that you designated in Step II-7 earlier.
2. The Dominion KX Manager applet will load and launch. Log on with the default username/password of admin / raritan.
3. Use Dominion KX Manager to navigate to the server port that you wish to change, and assign a name (up to 20 characters) to identify that
server.
V. Launch Raritan Remote Client (RRC)
Dominion KX provides secure Web-browser access from any Windows-based computer, enabling remote access to your
server(s) without the burden of having software on-hand.
1. Log on to any Windows-based computer with network access to Dominion KX. If you are using Windows NT, 2000, or XP, ensure that you
are not a “restricted” user.
2. Launch Internet Explorer, Mozilla, or Netscape. Ensure that your security settings allow the download and execution of ActiveX controls.
NOTE: The IE default security setting of “Medium” is sufficient.
3. In the URL text field of your Web browser, enter the IP address you assigned earlier in Step II-7.
4. Raritan Remote Client (RRC), the applet used to access and control servers connected to Dominion KX, will automatically launch and
display all Dominion KX units located on the same network subnet. If your Dominion KX unit is not automatically detected, select Connection
> New Profile in the menu bar to create a new entry.
5. Double-click on the entry corresponding to your Dominion KX, and log on with the default username/password of admin/raritan. Double-
click on a port to connect to the connected server with full BIOS-level control.