Operation, Maintanance and Installation Instructions SeaEra Toilets

Clean Gasket
and Gasket
Contact Surfaces
Thoroughly
Unscrew Tighten
Cleaning Instructions
IMPORTANT: Do not use cleaners that contain
ammonia, ethyl acetate, phosphoric acid or
concentrated chlorine bleach. These may cause
damage to the toilet.
Using C.P. a bio-enzymatic toilet bowl cleaner
(available from Raritan Engineering) will keep the
bowl clean and fresh smelling.
Recommend Visual Inspection
✔ For leaks at toilet and hose connections
✔ Hose clamps
✔ Condition of hoses
✔ Seacocks
✔ Condition of wires and connections
✔ In-Line Strainer (if you have one)
Cleaning In-Line Strainer
(Sea Water Models only)
1. Shut off intake seacock.
2. Unscrew bowl.
3. Remove filter.
4. Clean bowl and filter with a clean cloth.
5. Clean gasket and gasket contact surfaces
thoroughly.
6. Replace gasket, filter and bowl.
7. Open seacock.
8. Check for leaks.
MAINTENANCE
3
C.P.
Bowl
Filter