User manual

Chapter 6. Menu Options
Basic Network Settings
IP auto configuration
With this option you can define whether the ASMI module should fetch its network settings from a
DHCP or BOOTP server. For DHCP select "dhcp" and for BOOTP select "bootp" accordingly. If
you choose "none" then IP auto configuration is disabled. In this case the IP address and netmask
have to be configured manually. If necessary, gateway and DNS server IP addresses have to be set as
well.
Preferred host name
Preferred host name to request from DHCP server. Whether the DHCP server takes the ASMI
module’s suggestion into account or not depends on the DHCP server configuration.
IP address
IP address in the usual dot notation.
Subnet Mask
The net mask of the local network.
Gateway IP address
In case the ASMI module should be accessible from networks other than the local one, this IP
address must be set to the local network router’s IP address.
Primary DNS Server IP Address
IP address of the primary Domain Name Server in dot notation. If this option is left empty, the
ASMI module will not be able to perform name resolution.
Secondary DNS Server IP Address
IP address of the secondary Domain Name Server in dot notation. It will be used in case the Primary
DNS Server cannot be contacted.
Miscellaneous Network Settings
Remote Console and HTTPS port
Port number at which the ASMI module’s Remote Console server and HTTPS server are listening.
If left empty the default value (port 443) will be used.
HTTP port
Port number at which the ASMI module’s HTTP server is listening. If left empty the default value
(port 80) will be used.
Telnet port
Port number at which the ASMI module’s Telnet server is listening. If left empty the default value
(port 23) will be used.
64