Specifications

Chapter 7: Managed Powerstrips

Configuring Powerstrips Connected to SX 3.1

You can perform the following tasks in CC-SG to configure and manage

Powerstrips connected to SX 3.1 devices.

 Add a Powerstrip Connected to an SX 3.1 Device (on page 97)

 Move an SX 3.1's Powerstrip to a Different Port (on page 98)

 Delete a Powerstrip Connected to an SX 3.1 Device (on page 98)

Add a Powerstrip Connected to an SX 3.1 Device

The procedure for adding a powerstrip connected to an SX 3.1 device

varies, based on whether the SX 3.1 device has been added to CC-SG.

If the PowerStrip is connected to the SX 3.1 device and the device has not

yet been added to CC-SG:

1. Add the SX 3.1 device to CC-SG. See Add a KVM or Serial Device

(on page 54).

2. CCSG detects the PowerStrip and adds it automatically. The

PowerStrip will appear in the Devices tab beneath the SX 3.1 device

to which it is connected.

If the SX 3.1 device has already been added to CC-SG and the PowerStrip is

connected to the device later:

1. Add the SX 3.1 device to CC-SG. See Add a KVM or Serial Device

(on page 54).

2. Configure the ports of the SX 3.1 device. See Configuring Ports (on

page 60).

3. In the Devices tab, select the SX 3.1 device to which the PowerStrip

is connected.

4. Click the + next to the device icon to expand the list of ports.

5. Right-click the SX 3.1 port to which the PowerStrip is connected, and

select Add Powerstrip from the pop-up menu.

6. Enter the number of outlets that the PowerStrip contains, and then

click OK.

Next Steps:

1. Configure outlets. See Configuring Outlets on a PowerStrip (on

page 98).

2. Associate each outlet with the node that it powers. See Interfaces

for Managed Powerstrip Connections (on page 129).