User guide

Chapter 8: Device Management
115
Network Settings
UsetheNetworkSettingspagetocustomizethenetworkconfiguration
(e.g.,IPAddress,discoveryport,andLANinterfaceparameters)foryour
KXII‐101unit.
Basically,therearetwowaystosetupyourIPConfiguration:
• None.(Default)Thisoptionistherecommendedoption(StaticIP).
SincetheKXII‐101ispa
rtofyournetworkinfrastructure,youmost
likelydonotwantitsIPAddresstochangefrequently.Thisoption
allowsyoutosetthenetworkparameters.
• DHCP.TheIPAddressisautomaticallyassignedbyaDHCPserver.
¾ To change the network configuration:
1. ChooseDeviceSettings>Network.TheNetworkSettingspage
opens.

2. UpdatetheNetworkBasicSettings.RefertoNetworkBasicSettings
formoreinformationabouteachofthefields.
3. UpdatetheLANInterfaceSettings.RefertoLANInterfaceSettings
formoreinformationabouteachofthefields.
4. ClickOKtosettheseconfigurations.Ifyourchangesrequire
rebootingthedevice
,arebootmessageappears.