User guide

8
In This Chapter
ConfiguringtheTargetServer .........................................................................8
Connectingth
eKXII‐101................................................................................15
ConfiguringNetworkFire
wallSettings .......................................................21
Configuringth
eKXII‐101 ..............................................................................21
Configuring the Target Server
ThischapterdescribeshowtoinstallandconfiguretheKXII‐101.
Installationandconfigurationconsistsofthefollowingsteps:
1. ConfiguringTargetServer(seeʺConfiguringtheTa
rgetServerʺon
page8).
2. ConfiguringNetwor
kFirewallSettings(onpage21).
3. Connect
ingtheKXII‐101(onpage15).
4. Configuringth
eKXII‐101(onpage21).
Beforeinst
allingKXII‐101,firstconfigurethetargetserveryouwantto
accessviaKXII‐101,inordertoensureoptimumperformance,as
outlinedbelow.Notethatthefollowingconfigurationrequirements
applyonlytothetargetserver,nottothecomputersthatyouwillbe
usingtoaccessKXII‐10
1remotely.
Chapter 3
Installation and Configuration