User guide

IP Access Control
152
 ChooseSecurity>IPAccessControl,or
 ClicktheSetSystemACLbuttonfromtheNetworkSettingspage
TheIPAccessControlpageopens:

2. SelecttheEnableIPAccessControlcheckboxtoenableIPaccess
controlandtheremainingfieldsonthepage.
3. ChoosetheDefaultPolicy.ThisistheactiontakenforIPaddresses
thatarenotwithintherangesyouspecify.
 Accept.IPAddressesareallowedaccesstotheKXII‐10
1device.
 Drop.IPAddressesaredeniedaccesstotheKXII‐101device.
¾ To add (append) rules:
1. TypetheIPAddressandsubnetmaskintheIP/Maskfield.
2. ChoosethePolicyfromthedrop‐downlist.
3. ClickAppend.Theruleisaddedtothebottomoftherules li
st.
4. Repeatsteps1through3foreachruleyouwanttoenter.
¾ To insert a rule:
1. TypeaRule#.ARule#isrequiredwhenusingtheInsertcommand.
2. TypetheIPAddressandsubnetmaskintheIP/Maskfield.
3. ChoosethePolicyfromthedrop‐downlist
.