User guide

Configuring the KX II-101

Using the Remote Console

TheKXII‐101RemoteConsoleisaweb‐basedapplicationthatenables

youtoconfiguretheunitpriortouseandmanageafterithasbeen

configured.BeforeconfiguringtheKXII‐101usingtheRemoteConsole,

youmusthavebothyourworkstationandtheunitconnectedtoa

network.

ToconfiguretheKXII‐101

,you:

• Setanewpasswordtoreplacethedefault

• AssignanIPaddress

• Namethetargetserver

• Createusersandgroups

Setting a New Password

WhenyoufirstlogintotheRemoteConsole,youarepromptedtoseta

newpasswordtoreplacethedefault.ThenyoucanconfiguretheKX

II‐101.

1. LogontoaworkstationwithnetworkconnectivitytoyourKXII‐101

unit.

2. LaunchasupportedWebbrowsersuchasInternetEx

plorer(IE)or

Firefox.

3. Intheaddressfieldofthebrowser,enterthedefaultIPaddressofthe

unit:

192.168.0.192

4. PressEnter.Theloginpageopens.

5. Entertheusernameadmin andthepasswordraritan.

6. ClickLogin.

TheChangePasswordpageisdisplayed.

7. TyperaritanintheOldPa

sswordfield.

8. TypeanewpasswordintheNewPasswordfield;retypethenew

passwordintheConfirmNewPasswordfield.Passwordscanbeup

to64characterslongandcanconsistofEnglishalphanumericand

printablespecialcharacters.

9. ClickApply.

Youwillreceiveconfirmationtha

tthepasswordwassuccessfully

changed.