User guide

Chapter 3: Installation and Configuration

3. ClickPortNameforthetargetserver.ThePortPageopens.



4. Typeaname(upto32alphanumericandspecialcharacters).

5. ClickOK.

Creating Users and Groups

UserGroupsareusedwithlocalandremoteauthentication(viaRADIUS

orLDAP).ItisagoodideatodefineUserGroupsbeforecreating

individualusers,becausewhenyouaddauser,youmustassignthat

usertoanexistingusergroup.

¾ To create a user group:

1. OpentheGrouppageusingoneofthesemethods:

a. ChooseUs

erManagement>AddNewUserGroup,or

b. ClicktheAddbuttonfromtheUserGroupListpage.

2. TypeadescriptivenameforthenewusergroupintotheGroupname

field.

3. SetthePermissionsforthegroup.Checkthecheckboxesbeforethe

permissionsyouwa

nttoassigntoallusersbelongingtothisgroup.

4. SetthePortPermissions(Access,VMAccess,andPowerControl).

Specifytheserverportsthatcanbeaccessedbyusersbelongingto

thisgroupandthetypeofaccess.PleasenotethatthedefaultforVM

(virtualmedia)Access,li

keallportpermissionsisoff.Tousevirtual

media,thepermissionmustbeenabled.