User guide

Port Access Page
46
Port Access Page
AftersuccessfullyloggingintotheKXII‐101RemoteConsole,thePort
Accesspageopens.ThispagedisplaystheKXII‐101port,itsstatusand
availability.ThePortAccesspageprovidesaccesstotheKVMtarget
serverconnectedtotheKXII‐101.AKVMtargetserverisaserveryou
wanttocontr
olthroughtheKXII‐101unit;itisconnectedtotheKX
II‐101usingtheattachedPS/2connectorsonthedevice.
Note:ForeachconnectiontoaKVMtargetserver,anewVirtualKVM
Clientwindowisopened.
¾ To use the Port Access page:
1. FromtheKXII‐101RemoteConsole,clickthePortAccesstab.The
PortAccesspageopens:

 No.ThereisjustoneportavailablefortheKXII‐101.
 Name.ThenameoftheKXII‐101port;initiallysetto
Dominion_KX101G2_Port1,butyoucanchangethenameto
somethingmoredescriptive.
 Availability.TheAvailabilitycanbeIdle,Connected,Busy,or
Unavailable.
2. Toconnecttotheta
rgetserver,clicktheNameofthedevice/target
serverthenclicktheConnectpop‐up.TheVirtualKVMClient
windowopensandtheavailabilitychangestoBusy.
3. Todisconnectfromthetargetserver,clicktheNameofthe
device/targetserverthenclicktheDisconnectpop‐up.TheVirt
ual
KVMClientwindowclosesandtheavailabilitychangestoIdle.