User guide

Chapter 5: Users, Groups, and Access Permissions

*Defaultsetting

Group-based IP ACL (Access Control List)

Important:Pleaseexercisecautionwhenusinggroup‐basedIPaccess

control.ItispossibletobelockedoutofyourKXII‐101ifyourIP

Addressiswithinarangethathasbeendeniedaccess.

ThisfeaturelimitsaccesstotheKXII‐101devicebyusersintheselected

grouptospecificIPaddresses.Thisfeatureappliesonlytousers

belongingtoaspecificgroup,unliketheIPAccessControlListfeature

whichappliestoallaccessattemptstothedevice,isprocessedfirst,and

kespriority.RefertoIPAccessControl(onpage151)formore

inform

ation.

UsetheIPACLsectionoftheGrouppagetoadd,insert,replace,and

deleteIPaccesscontrolrulesonagroup‐levelbasis.



¾ To add (append) rules:

1. TypethestartingIPAddressintheStartingIPfield.

2. TypetheendingIPAddressintheEndingIPfield.

3. ChoosetheActionfromtheavailableoptions:

 Accept.IPAddressesspecifyingacceptareallowedaccesstothe

KXII‐101device.

 Drop.IPAddressesspec

ifyingdroparedeniedaccesstotheKX

II‐101device.

4. ClickAppend.Theruleisaddedtothebottomoftherules list.

5. Repeatsteps1through4foreachruleyouwanttoenter.

¾ To insert a rule:

1. TypeaRule#.ARule#isrequiredwhenus

ingtheInsertcommand.

2. TypetheStartingIPandEndingIPfields.

3. ChoosetheActionfromthedrop‐downlist.