User guide

Chapter 2: Installation and Configuration

To change the command line resolution:

1. Run the following command: # eeprom output-

device=screen:r1024x768x75 where 1024x768x75 is any resolution

that the KX II-101-V2 supports.

2. Restart the computer.

GUI Resolution/32 Bit

To check the GUI resolution on 32 bit cards:

1. Run the following command: # /usr/sbin/pgxconfig –prconf

To change the GUI resolution on 32 bit cards:

1. Run the following command: # /usr/sbin/pgxconfig –

res1024x768x75 where 1024x768x75 is any resolution that the KX II-

101-V2 supports.

2. Restart the computer.

GUI Resolution/64 Bit

To check the GUI resolution on 64 bit cards:

1. Run the following command: # /usr/sbin/m64config –prconf

To change the resolution on 64 bit cards:

1. Run the following command: # /usr/sbin/m64config –

res1024x768x75 where 1024x768x75 is any resolution that the KX II-

101-V2 supports.

2. Restart the computer.

GUI Resolution/Solaris 8

To check the resolution on Solaris

™

8 for 32 bit and 64 bit cards:

1. Run the following command: # /usr/sbin/fbconfig –prconf

To change the resolution on Solaris 8 for 32 and 64 bit cards:

1. Run the following command: # /usr/sbin/fbconfig –res1024x768x75

where 1024x768x75 is any resolution that the KX II-101-V2 supports.

2. Restart the computer.