User manual

CHAPTER 2: INSTALLATION 13
Initial Configuration
The steps below allow you to quickly set up IP-Reach for the first time using the IP-Reach Setup
Wizard. The IP-Reach Setup Wizard appears only when accessing the Administrative Menus on an
unconfigured IP-Reach, and guides you through initial configuration parameters. The easiest way to
perform this initial configuration is by using the Local Admin Console (see ‘Physical Connection’
instructions in the previous sections).
1. Power ON IP-Reach via the power switch on the back of the IP-Reach unit.
2. The Welcome to IP-Reach Setup Wizard Screen will appear on the Local Admin Console.
3. Press the letter <B> on the Local Admin Console keyboard to begin the IP-Reach Setup Wizard.
4. The Key Configuration Screen will appear
On this screen, enter each Raritan Remote Client User License Key purchased, pressing <Tab>
or <Enter> after each key is entered. Raritan Remote Client User License Key codes can be found on the
license certificates shipped with your unit.
When all named-user keys are entered, press <Ctrl+S> to save the keys entered.