User manual

58 IP-REACH USER MANUAL
Note: Once Restrict user’s IP address has been enabled, an entry must be made in at
least one of the IP Mask fields, since 0.0.0.0 is an impossible IP address.
- IP Mask: Enter remote IP address location from which this user will be granted remote
network access. A specific IP Mask instructs IP-Reach to grant remote access to only this
specific remote IP address. For example, a mask of 10.0.0.1 instructs IP-Reach to grant
remote access from the remote IP address location 10.0.0.1 only. The value 255 acts as a
wildcard in any location of the IP mask address. For example, a mask of 10.0.0.255 instructs
IP-Reach to grant this user remote access from any remote IP address location within the
range 10.0.0.0 to
10.0.0.255. Similarly, a mask of 192.255.255.255 instructs IP-Reach to grant this user remote
access from any remote IP address location beginning with 192.
- NO: The user has no network connection capability.
• Allow Modem Access: Determines whether this user will be able to access IP-Reach via a Modem
connection for access via and analog telephone line.
- NO: The user will not have Modem connection capability.
- YES (default): The user will have Modem connection capability.
• Allow Web Browser Access: Determines whether this user will be able to access IP-Reach via
Web Browser.
- NO: The user will not have Web Browser connection capability.
- YES (default): The user will have Web Browser connection capability.
Press <Ctrl+S> to save changes or <Esc> to cancel changes, and return to the Add, Change, or Delete
User Accounts screen.
Change User Profile
See the previous section Add New Users and the User Account Settings screen for details on setting user
profile specifics. When you have made the required changes to the User Profile, press <Ctrl+S> to save
changes or <Esc> to cancel changes, and return to the Add, Change, or Delete User Accounts screen.
Delete Users
Use the <Tab>, <↑>, or <↓> keys to select a user from the Add, Change, or Delete User Accounts screen
and press the letter <D> to delete the user profile selected. IP-Reach will ask you if you are sure that you
want to delete this user.
• Y: Yes. The selected user will be deleted and IP-Reach will return you to the Add, Change, or Delete
User Accounts screen showing all user profiles, with the deleted user no longer listed.
• N: No. IP-Reach will return you to the Add, Change, or Delete User Accounts screen, showing all
user profiles, with the selected user still listed.
Log Off Users
Use the <Tab>, <↑>, or <↓> keys to select a user from the Add, Change, or Delete User Accounts screen
who is currently remotely logged in to IP-Reach (Logged in – YES) and press the letter <L> to log off
the selected user. IP-Reach will ask you if you are sure that you want to log off this user.
• Y: Yes. The selected user will be logged off of IP-Reach and the remote session will end. IP-Reach
will return you to the Add, Change, or Delete User Accounts screen, showing all user profiles, with
the selected user no longer listed as logged in.
• N: No. IP-Reach will return you to the Add, Change, or Delete User Accounts screen, showing all
user profiles, with the selected user still listed as being logged in.