User manual

8 PARAGON II USER MANUAL
2. Line 2: User port status message: “A/N User (1, 2, 3 …) → None”
User port status displays a scrolling status of all user ports, one user port per second. The User’s active
channel, 1 through 256, is displayed after the user port number.
Raritan Computer Paragon II: Paragon832/1
Ready
A User (1, 2, 3 … 8) → None
A=Active User # 1-8
- OR -
Raritan Computer Paragon II: Paragon832/1
Ready
N User (1, 2, 3, … 8) → None
N=Non-Active User # 1-8
Figure 7 LCD Normal Display
Power Up Option:
If you hold down the FUNC button on the front panel of the Paragon II unit during Power Up, the Paragon
II unit will clear its database and reset to factory defaults. Confirm functions by pressing the ENT button
on the front panel.
Clear Database
Hit Ent/ESC?
Figure 8 Power Up Clear Database
Function Selection Screen:
Several administrative functions can be performed on the Function Selection Screen on the Paragon II
unit’s front panel.
Display Ver./SN
Test User UST1
Test Chan. UKVM
Test Stack Unit
Stacking Support
Set LCD Contrast
Re-Configure
Set IP Address
Reset Unit
Figure 9 LCD Functions
Selecting a Function:
Press the FUNC button on the front panel of the Paragon II unit to enter Function Selection mode and use
the  and  buttons to scroll through the Function List. Press the ENT button on the front panel to select
displayed function and use the instructions below for each specified function. Press the ESC button on the
front panel at any time to return to Normal Display.
Function Menu
Display Ver./SN
Figure 10 Function Selection