User guide

Chapter 5: Using the Web Interface

Testing the LDAP Server Connection

You can test the connection to any LDAP/LDAPS server to verify the

server accessibility or the validity of the authentication settings.

To test the connection to an LDAP/LDAPS server:

1. Choose Device Settings > Security > Authentication. The

Authentication Settings dialog appears.

2. Select the LDAP/LDAPS server that you want to test.

3. Click Test Connection to start the connection test.

Editing the LDAP Server Settings

If the configuration on any LDAP/LDAPS server has been changed, such

as the port number, bind DN and password, you must modify the

LDAP/LDAPS settings on the Dominion PX device accordingly, or the

authentication fails.

To modify the LDAP authentication configuration:

1. Choose Device Settings > Security > Authentication. The

Authentication Settings dialog appears.

2. Select the LDAP/LDAPS server that you want to edit.

3. Click Edit. The Edit LDAP Server Configuration dialog appears.

4. Make necessary changes to the information shown.

5. Click OK to save the changes.

Deleting the LDAP Server Settings

You can delete the authentication settings of a specific LDAP/LDAPS

server when the server is not available or used for remote authentication.

To remove one or multiple LDAP/LDAPS servers:

1. Choose Device Settings > Security > Authentication. The

Authentication Settings dialog appears.

2. Select the LDAP/LDAPS server that you want to remove. To make

multiple selections, press Ctrl+click or Shift+click to highlight multiple

ones.

3. Click Delete.

4. A message appears, prompting you to confirm the operation. Click

Yes to confirm the deletion.

5. Click OK to save the changes.