User guide

Chapter 5: Using the Web Interface
94
Naming Outlets
You can give each outlet a name up to 32 characters long to identify the
equipment connected to it.
The customized name is displayed along with the label in parentheses
throughout the web interface.
Note: In this context, the label refers to the outlet number.
To name an outlet:
1. If the PDU folder is not expanded, expand it to show all components
and component groups. See Expanding the Tree (on page 43).
2.
Click
Outlets in the Dominion PX Explorer pane, and the Outlets page
opens in the right pane.
3. Click the outlet you want in the right pane.
4. Click Setup. The setup dialog for the selected outlet appears.
5. Type a name in the Outlet Name field.
6. Click OK to save the changes.
Checking Associated Circuit Breakers
To find out each outlet is protected by which circuit breaker, you can check
the Outlets page.
Tip: This type of information is also available by choosing Maintenance >
Device Information. See Displaying the PDU Information (on page 52).
To check associated circuit breaker for all outlets:
1. If the PDU folder is not expanded, expand it to show all components
and component groups. See Expanding the Tree (on page 43).
2.
Click
Outlets in the Dominion PX Explorer pane, and the Outlets page
opens in the right pane.