User guide

Chapter 1: Introduction
2
 The ability to monitor environmental factors such as external
temperature and humidity
 User-specified location attributes for environmental sensors
 An audible alarm (beeper) to indicate current overload
 Configurable alarm thresholds and hysteresis
 Configurable assertion timeout for thresholds
 The ability to remotely track the locations of IT devices on the rack
through connected asset sensors
 Support for SNMP v1, v2, and v3
 The ability to send traps using the SNMP protocol
 The ability to store a data log of all sensor measurements and retrieve
it via SNMP
Note: Raritan's Power IQ or other external systems can retrieve the
stored data (samples) from Dominion PX.
 The ability to configure and set values through SNMP, including power
threshold levels
 The ability to save one Dominion PX device's configuration settings
and then deploy those settings to other Dominion PX devices
 Local overcurrent protection (OCP) via branch circuit breakers or
fuses on products rated over 20A to protect connected equipment
against overload and short circuits
 Measurement accuracy for the inlet:
Voltage: 1%
Current: 1%+/-0.1A
Active power: 1%
Active energy: 1%
 A combination of outlet types (for example, C13 and C19 outlets) in
select models
 A combination of outlet voltages (120 and 208 volts) in select models
 Support for high current devices (such as Blade Servers) in select
models
 The ability to diagnose the network, such as pinging a host or listing
TCP connections
 Full disaster recovery option in case of a catastrophic failure during a
firmware upgrade
Package Contents
The following sub-topics describe the equipment and other material
included in the product package.