User guide

Chapter 5: Using the Web Interface
128
5. In the Temperature Unit field, click the drop-down arrow, and select
the desired option from the list.

: This option displays the temperature in Celsius.

: This option displays the temperature in Fahrenheit.
6. Click OK to save the changes.
Tip: You can determine the desired temperature unit when creating user
profiles. See Creating a User Profile (on page 64).
Network Diagnostics
Dominion PX provides two tools on the web interface for troubleshooting
potential networking issues.
 Ping
 Trace Route
 List TCP Connections
Tip: These network diagnostic tools are also available through CLI. See
Network Troubleshooting (on page 217).
Pinging a Host
The Ping tool is useful for discovering whether a host is accessible through
the network or Internet.
To ping a host:
1. Choose Maintenance > Network Diagnostics > Ping. The Ping
Network Host dialog appears.
2. In the Host Name field, type the name or IP address of the host that
you want to check.
3. In the Number of Requests field, type a number up to 10 or adjust the
value by clicking either arrow. This number determines how many
packets are sent for pinging the host.
4. Click Run Ping to start pinging the host. A dialog appears, displaying
the Ping results.
5. Click Close to quit the dialog.