User guide

136
This SNMP section helps you set up Dominion PX for use with an SNMP
manager. Dominion PX can be configured to send traps to an SNMP
manager, as well as receive GET and SET commands in order to retrieve
status and configure some basic settings.
In This Chapter
Enabling SNMP .....................................................................................136
Configuring Users for Encr
ypted SNMP v3...........................................137
Configuring SNMP Traps.......................................................................138
SNMP Gets
and Sets ............................................................................139
A Note about Enabling Thres
h
olds........................................................141
Enabling SNMP
To communicate with an SNMP manager, you must first enable the SNMP
agent on the Dominion PX device.
To enable SNMP:
1. Choose Device Settings > Network Services > SNMP. The SNMP
Settings dialog appears.
2. Select the "enable" checkbox in the "SNMP v1 / v2c" field to enable
communication with an SNMP manager using SNMP v1 or v2c
protocol.
Chapter 6
Using SNMP