User guide

Chapter 7: Using the Command Line Interface
150
Sensor type Description
activeEnergy Active energy sensor
Displayed information:
 Without the parameter "details," only the reading, state, threshold,
hysteresis and assertion delay settings of the specified inlet pole
sensor are displayed.
 With the parameter "details," more sensor information is displayed,
including accuracy, resolution, tolerance, and range.
 If the requested sensor type is not supported, the message "Sensor is
not available" is displayed.
Circuit Breaker Information
This command is NOT available for a PDU without any overcurrent
protection mechanism.
This command syntax shows the circuit breaker information.
# show ocp <n>
To show detailed information, add the parameter "details" to the end of the
command.
# show ocp <n> details
Variables:
 <n> is one of the options: all, or a number.
Option Description
all Displays the information for all circuit breakers.
A specific circuit
breaker number
Displays the information for the specified circuit
breaker only.
Displayed information:
 Without the parameter "details," only the circuit breaker status and
name are displayed.
 With the parameter "details," more circuit breaker information is
displayed in addition to status, such as the rating and RMS current
value.