User guide

Chapter 2: Rack-Mounting the PDU

2. Screw the L-bracket to the PDU and ensure the bracket is fastened

securely.

3. Repeat Steps 1 to 2 to screw another L-bracket to the bottom of the

PDU.

4. After both L-brackets are installed on the PDU, you can choose either

of the following ways to mount the PDU in the rack.

 Using rack screws, fasten the PDU to the rack through the two

upper holes of each L-bracket.

 Mount the PDU by screwing a mounting button in the back center

of each L-bracket and then having both buttons engage the

mounting holes in the rack. The recommended torque for the

button is 1.96 N·m (20 kgf·cm).

Mounting 1U or 2U Models

Using the appropriate brackets and tools, fasten the 1U Dominion PX

device to the rack or cabinet.

To mount the Dominion PX device:

1. Attach one rackmount bracket to one side of the Dominion PX device.

a. Align two oval-shaped holes of the rackmount bracket with two

threaded holes on one side of the Dominion PX device.

b. Secure the rackmount bracket with two of the Raritan-provided

screws.