User guide

Chapter 3: Installation and Configuration

Connecting the Asset Management Sensor (Optional)

You can remotely track the locations of up to 48 IT devices in the rack by

connecting an asset management sensor (asset sensor) to the Dominion

PX device after these IT devices are tagged electronically.

To use this asset management feature, you need the following items:

 Raritan asset sensors: An asset sensor transmits the tagging and

positioning information to the Dominion PX device.

 Raritan asset tags: An asset tag electronically tags the IT device

where it is attached.

Attaching Asset Sensors to a Rack

Each tag port on the asset sensors corresponds to a rack unit and can be

used to locate the IT devices on a specific rack (or cabinet). For each rack,

you can attach up to 6 asset sensors, consisting of one MASTER and five

SLAVE asset sensors.

Number Item

8U MASTER asset sensor with 8 tag ports

8U SLAVE asset sensor with 8 tag ports

5U SLAVE asset sensor with 5 tag ports

To attach asset sensors to a rack:

1. Connect a MASTER asset sensor to an 8U SLAVE asset sensor.