User guide

Chapter 3: Installation and Configuration
27
3. Connect the asset sensor on the rack to the Dominion PX device by
following this procedure:
a. Connect one end of a Category 5e/6 cable to the RJ-45 connector
on the MASTER asset sensor.
b. Connect the other end of the cable to the FEATURE port on the
Dominion PX device.
The Dominion PX device supplies power to asset sensors through
the Category 5e/6 cable.
Letter Item
A Dominion PX device
B Asset sensors
C Asset tags
D IT devices, such as servers
Note: The PDU cannot detect how many rack units the connected asset
sensor(s) support. You must provide the information to the PDU manually.
See Configuring the Asset Sensor (on page 122).