User guide

Chapter 5: Using the Web Interface

Rebooting the Dominion PX Device

You can remotely reboot the Dominion PX device via the web interface.

To restart the device:

1. Choose Maintenance > Unit Reset. The Reset Device dialog appears.

2. Click Yes to reboot Dominion PX.

3. A message appears with a countdown timer showing the remaining

time of the operation. It takes about one minute to complete.

4. When the reset is complete, the Login page opens. Now you can log

back in to the Dominion PX device.

Note: If you are not redirected to the Login page after the reset is complete,

click the underlined text "this link" in the message.

User Management

Dominion PX is shipped with one built-in user profile: admin, which is

used for initial login and configuration. This profile has full system and

outlet permissions, and should be reserved for the system administrator. It

cannot be deleted and its permissions are not user-configurable except for

the SNMP v3 permission.

All users must have a user profile, which specifies a login name and

password, and contains additional (optional) information about the user.

Every user profile must have at least a role to determine the user's system

and outlet permissions. See Setting Up Roles (on page 68, on page 69).

Tip: By defaul

multiple users can log in simultaneously using the same

Creating a User Profile

Creating new users adds a new login to Dominion PX.

To create a user profile:

1. Choose User Management > Users. The Manage Users dialog

appears.