User guide

Chapter 5: Using the Web Interface
75
Action Procedure
 Click OK to save the changes.
The system automatically numbers the rule.
Insert a rule between two
existing rules
 Select the rule above which you want to insert a new rule. For example,
to insert a rule between rules #3 and #4, select #4.
 Click Insert. The "Insert new Rule" dialog appears.
 Type an IP address and subnet mask in the IP/Mask field.
 Select Accept, Drop or Reject from the drop-down list in the Policy field.
 Accept: Accepts traffic from the specified IP address(es).
 Drop: Discards traffic from the specified IP address(es), without
sending any failure notification to the source host.
 Reject: Discards traffic from the specified IP address(es), and an
ICMP message is sent to the source host for failure notification.
 Click OK to save the changes.
The system inserts the rule and automatically renumbers the following rules.
4. When finished, the rules appear in the Configure IP Access Control
Settings dialog.
5. Click OK to save the changes. The rules are applied.