User guide

Chapter 5: Using the Web Interface
76
Editing Firewall Rules
When an existing firewall rule requires updates of IP address range and/or
policy, modify them accordingly.
To modify a firewall rule:
1. Choose Device Settings > Security > IP Access Control. The
Configure IP Access Control Settings dialog appears.
2. Ensure the Enable IP Access Control checkbox is selected.
3. Select the rule to be modified in the rules list.
4. Click Edit or double-click the rule. The Edit Rule dialog appears.
5. Make changes to the information shown.
6. Click OK to save the changes.
7. Click OK to quit the Configure IP Access Control Settings dialog, or
the changes are lost.
Sorting Firewall Rules
The rule order determines which one of the rules matching the same IP
address is performed.
To sort the firewall rules:
1. Choose Device Settings > Security > IP Access Control. The
Configure IP Access Control Settings dialog appears.
2. Ensure the Enable IP Access Control checkbox is selected.
3. Select a specific rule by clicking it.
4. Click
or to move the selected rule up or down until it reaches
the desired location.
5. Click OK to save the changes.
Deleting Firewall Rules
When any firewall rules become obsolete or unnecessary, remove them
from the rules list.
To delete a firewall rule:
1. Choose Device Settings > Security > IP Access Control. The
Configure IP Access Control Settings dialog appears.
2. Ensure the Enable IP Access Control checkbox is selected.
3. Select the rule that you want to delete. To make multiple selections,
press Ctrl+click or Shift+click to highlight multiple ones.