User guide

Chapter 5: Using the Web Interface
81
Action Do this...
Add a rule to the end of
the rules list
 Click Append. The "Append new Rule" dialog appears.
 Type a starting IP address in the Starting IP Address
field.
 Type an ending IP address in the Ending IP Address
field.
 Select a role from the drop-down list in the Role field.
This rule applies to members of this role only.
 Select Allow or Deny from the drop-down list in the
Policy field.
 Allow: Accepts traffic from the specified IP address
range when the user is a member of the specified
role
 Deny: Drops traffic from the specified IP address
range when the user is a member of the specified
role
 Click OK to save the changes.
The system automatically numbers the rule.
Insert a rule between
two existing rules
 Select the rule above which you want to insert a new
rule. For example, to insert a rule between rules #3
and #4, select #4.
 Click Insert. The "Insert new Rule" dialog appears.
 Type a starting IP address in the Starting IP Address
field.
 Type an ending IP address in the Ending IP Address
field.
 Select a role from the drop-down list in the Role field.
This rule applies to members of this role only.
 Select Allow or Deny from the drop-down list in the
Policy field.
 Allow: Accepts traffic from the specified IP address
range when the user is a member of the specified
role
 Deny: Drops traffic from the specified IP address
range when the user is a member of the specified
role
 Click OK to save the changes.
The system inserts the rule and automatically renumbers the
following rules.
4. Click OK to save the changes.