User guide

Chapter 11: Command Line Interface
163
nfsgetkey
Command
Description
encryption (rc4 or aes128)
nfsgetkey Command Example
admin > Config > Log > nfsgetkey type aes128
nfssetkey Command
The nfssetkey command sets the type of encryption and the key.
Because NFS is insecure, it can be easily accessed and the data
misused. With SX, you can encrypt the data stored on the NFS server.
Consequently, if the data were to be accessed inappropriately, it would
be of no use to anyone without the encryption key.
The key can be set and obtained only from the SX.
Syntax
nfssetkey [type <rc4|aes128>] [key string]
nfssetkey
Command
Description
type <rc4|aes128>
Type of encryption type to be used
key string
Provide key string to be used for encryption
Note: aes128 is not supported in 3.0.
nfssetkey Command Example
admin > Config > Log > nfssetkey type aes128 key
D2F05B5ED6144138CAB920CD
NFS Encryption Enable Command
To enable port logging and encryption of data:
admin > Config > Log > portlog enable true encrypt
true
Portlog Command
The portlog command enables and configures the logging of port data.
Syntax
portlog [enable <true|false>] [prefix name] [size
value] [timestamp interval] [update interval]
[inputlog <true|false>] [indir name] [outdir name]
[encrypt <true|false>] [block <true|false>]