User guide

Chapter 11: Command Line Interface
168
Modem Menu Command Examples
admin > Config > modem > dialin enable true serverip
10.0.13.211
clientip 10.0.13.212 accessmodes PPPOnly
admin > Config > modem > dialback enable true
admin > Config > Modem > show modem
Modem Settings
Dialin Enabled: false
Access Mode: All
Server Address: 10.0.13.211
Client Address: 10.0.13.212
Dialback with local user
Before a modem connection can be established, the local user for dial-in
authentication should be configured. A new user can be added or an
existing one can be reconfigured with a correct dialback. An example
configured user (dialback number is 129) should have the following
settings:
PPP dial back works for 3 digit extensions and 7 and 11 digit numbers. If
you are using 7 and 11 digit numbers, you must use commas to separate
the 9 used for dialing an outside line and the 1 that precedes an area
code from the rest of the number. For example, 9,1,5555551212.
User Settings:
Login : Modem
Name : Dialback
Info: SX
Dialback: 129
Group :Admin
Active : 1
When this configuration is set, the modem connection can be
established. The user may use various types of modem dial-up clients to
accomplish a successful modem connection to the SX.
Dialback with remote Radius user (Cistron Radius v1.6.7)
Dialin and Dialback should be enabled on the SX used for modem
communication. Primary (or/and Secondary) RADIUS Server Settings
should be configured correctly and enabled on the SX: