User guide

Chapter 11: Command Line Interface
204
backup is written.
<login login>
Username of the account on the system where
the backup is stored.
<password
password>
Password of the account on the system where
the backup is stored.
[path pathname]
Specifies the path to the backup file.
[file filename]
Specifies the name of the file in which the
backup is saved.
backup Command Example
In this example, the console server data is sent to a system at the IP
address 192.168.51.220. The guest account and password are used.
The data is saved at the top level of the guest account as a file named
backupfile.
admin > system > backup ip 10.0.0.188 login sx
password qaz1wsx path /home/backup file bac
Cleareventlog Command
The cleareventlog command clears the contents of the local event log.
Syntax
Cleareventlog
cleareventlog Command Example
admin > Config > Log > cleareventlog
Factoryreset Command
The factoryreset command returns the SX console server to its default
factory settings.
Important: If you choose to revert to the factory settings, you will erase
all your custom settings and will lose your connection to the SX because,
upon rebooting, the IP address of the unit is reset to the factory default
IP address of 192.168.0.192. If the network is running a DHCP server,
the unit is reset to a different IP address, because DHCP is enabled by
default when the unit is reverted to factory settings.