User guide

Chapter 11: Command Line Interface
208
Upgrade Command
Note: To perform an upgrade, there must be a configured remote ftp
server.
The upgrade command upgrades one version of the system to another
version, for example v2.5 to v3.0.
During the upgrade, SX verifies there is enough space on the device to
perform the upgrade. If there is not, the SX restarts and the upgrade
does not take place. If the upgrade fails due to lack of space, clear the
local logs on the device and try upgrading again. Contact Raritan
Technical Support if you still cannot upgrade after clearing the local logs.
Syntax
upgrade [ip ipaddress] [login login] [password
password] [path pathname]
upgrade
Command
Description
ip ipaddress
IP Address of FTP Server
login login
FTP Server login name
password
password
FTP Server password
path pathname
FTP server path. For example,
/ftphome/UpgradePack/Pack1of1
upgrade Command Example
admin > Maintenance > upgrade ip 10.0.0.188 login sx
password qaz1wsx path
/var/ftp/UpgradePack_2.5.6_3.0.0.1.15/Pack1of1
Upgradehistory Command
The upgradehistory command provides information about the last time
you upgraded the system.
Syntax
upgradehistory
upgradehistory Command Example
admin > Maintenance > upgradehistory
Overall Upgrade History:
3.0.0.1.15 Wed Sep 13 19:07:38 2006