User guide

Chapter 13: Power Control
248
Scenario #7
Turn ON Group and Port Association
simultaneously
outlet8 of PowerStr1 which has been created and
available in the list.
Action
Enter Command.
Press Enter.
CLI Input
powerdelay sequence 2 cycle 5
on port 3 nodegroup Group1
Scenario #8
Turn OFF Group and Port Association
simultaneously
Pre-condition
Administrator user is logged in via CLI.
Administrator is in power menu.
Group Association named Group1 (shown in Fg.1) is
already created. Port3 is already associated with
outlet8 of PowerStr1 which has been created and
available in the list.
Action
Enter Command.
Press Enter.
CLI Input
powerdelay sequence 2 cycle 5
off port 3 nodegroup Group1
Scenario #10
Recycle Group and Port Association
simultaneously
Pre-condition
Administrator user is logged in via CLI.
Administrator is in power menu.
Group Association named Group1 (shown in Fg.1) is
already created. Port3 is already associated with
outlet8 of PowerStr1 which has been created and
available in the list.
Action
Enter Command.
Press Enter.
CLI Input
powerdelay sequence 2 cycle 5
cycle port 3 nodegroup Group1.