™ Grill Accessories Ask your Solaire dealer about these and other accessories for your new grill. For more information, visit us on the web at www.solairegrills.com. Steamer/Fryer Stainless Steel Griddle BBQ Tray Wood Chip Smoker Rotisserie Kit Burner Kits Customize your 27” InfraVection Grill with a burner kit that can make your grill all infrared or all conventional. Installation is quick and easy.
Parts List Drawing Thank You for Choosing Solaire � We at Rasmussen Iron Works, Inc., would like to offer our sincere thanks for purchasing a Solaire Infrared Grill. We believe that you are now in possession of one of the finest outdoor cooking appliances ever produced. By carefully following the instructions outlined in this Care & Use Manual you can be assured of years of safe, trouble-free operation and the most succulent grilled foods you have ever experienced.
Parts List ITEM No. Table of Contents PART No. DESCRIPTION Model No. 1 2730R Rear Hood 27” AGBQ-27 1 1a 2830R Rear Hood 27”XL AGBQ-27XL 1 HOW TO OBTAIN SERVICE 2 2726R Front Hood 27” AGBQ-27 1 2a 2876R Front Hood 27”XL AGBQ-27XL 1 3 6008R Stander Bracket & phenolic base AGBQ MODELS 2 For service, contact your Solaire 4 6003R 27” hood handle (12” embossing) AGBQ MODELS 1 Infrared Grilling Systems dealer.
Safety Precautions SAFETY PRACTICES TO AVOID PERSONAL INJURY When properly cared for, your SOLAIRE INFRARED Grill will give safe, reliable service for many years. However, extreme care must be used since the grill produces intense heat, which can increase accident potential. When using this appliance, basic safety practices must be followed, including the following: Read this Care and Use Manual carefully and completely before using your grill to reduce the risk of fire, burn hazard or other injury.
Locating & Assembling the Grill Built-in Cutout Details Non-combustible enclosure 26 Grill Cutout A Dimension A Model AGBQ-27 Model AGBQ-27XL Access Doors 87/8 36 35/8 (see note) 37/8 Note: Min. 2” clearance required between edge of cutout and inside back wall of enclosure for gas regulator Combustible enclosure 16 1/4” 21” Dimension B Model IRAD-21 Model IRAD-30 Model IRAD-42 18 1/4” 27 1/4” 39 1/4” SERVICE REQUIREMENTS B Gas Pressure: 4.0” W.C. natural gas 10.0” W.C.
L.P. (Propane) Gas Hookup NEVER CONNECT THE GRILL TO AN UNREGULATED GAS SUPPLY. Never connect an unregulated gas line to the appliance. Total gas consumption (per hour) with both burners on “HI”: 27” Grill 27” XL Grill 27” XL Rotisserie 24,000 BTU 32,000 BTU 8,000 BTU The installation of this appliance must conform with local codes or, in the absence of local codes, to the national fuel gas code, ANSI Z223.1a-1988. Installation in Canada must be in accordance with the Standard CAN/ CGA-B149.
Gas Conversion Natural Gas Hookup GAS CONVERSION REQUIRES A CONVERSION KIT, INCLUDED WITH YOUR GRILL OR AVAILABLE FROM YOUR SOLAIRE DEALER GRILL MODEL AGBQ-27 AGBQ-27XL AGBQ-27XL Rotis PROPANE ORIFICE #59 (1.05mm) #56 (1.22 mm) #66 (.84mm) NATURAL GAS ORIFICE #51 (1.70 mm) #48 (1.95mm) #54 (1.40 mm) TO CONVERT YOUR SOLAIRE GRILL FROM PROPANE TO NATURAL GAS, FOLLOW THESE STEPS: 1. Remove the rear top panel from the Grill; this will give access to the regulator (see drawing below). 2.
Leak Testing Care of Stainless Steel IMPORTANT NOTE ALWAYS CHECK FOR LEAKS AFTER EVERY L.P. TANK CHANGE GENERAL Although all gas connections on your SOLAIRE INFRARED Grill are leak tested at the factory prior to shipment, a complete gas tightness check must be performed at the installation site due to possible mishandling in shipment, or excessive pressure unknowingly being applied to the unit. Periodically check the whole system for leaks, or immediately check if the smell of gas is detected.
Care & Maintenance Tips on Infrared Grilling ALWAYS KEEP THE AREA SURROUNDING THE GRILL FREE FROM ALL COMBUSTIBLE MATERIALS, GASOLINE AND OTHER FLAMMABLE VAPORS AND LIQUIDS. GRILLING GRIDS GRILL BURNERS TO REASSEMBLE THE BURNERS: Routine cleaning of the grill grids is best accomplished by scrubbing the grids with a brass or stainless steel brush immediately before and after cooking, while the grill is hot. Wear a barbeque mitt to protect your hand from the heat while cleaning.
Operating the Grill NOTE: The hot grill sears the food, sealing in the juices. The longer preheat period, the faster the meat browns and the darker the sear marks. Place the food on the grill and cook to the desired level. Adjust heat setting, if necessary. The control knob may be set to any position between “HI” and “LO”. DO NOT leave the grill unattended while cooking. • Properly pre-heating the grill. • Ensuring grill grids are properly installed with V-shape up.
Optional Accessories BBQ TRAY: This optional accessory serves a dual purpose. First, it will catch drippings and help prevent flare-ups when cooking particularly juicy foods, either on the grill or the rotisserie. Second, it will serve as a heat diffuser when grilling delicate foods such as flaky fishes. To use the BBQ Tray, follow these instructions: 1. Remove one of the V-grate grilling grids and place the BBQ Tray into the grill, suspending it from front to back as shown in Figure 9.
Operating the Rotisserie (27XL) Your AGBQ-27XL grill is capable of performing rear burner infrared rotisserie cooking. The placement of the burner allows the use of a rotisserie basting pan (not included) beneath the food to collect juices and drippings for basting and gravy. The contents of the pan can be flavored with the addition of herbs, onion, garlic and spices.
Operating the Rotisserie (27XL) Your AGBQ-27XL grill is capable of performing rear burner infrared rotisserie cooking. The placement of the burner allows the use of a rotisserie basting pan (not included) beneath the food to collect juices and drippings for basting and gravy. The contents of the pan can be flavored with the addition of herbs, onion, garlic and spices.
Optional Accessories BBQ TRAY: This optional accessory serves a dual purpose. First, it will catch drippings and help prevent flare-ups when cooking particularly juicy foods, either on the grill or the rotisserie. Second, it will serve as a heat diffuser when grilling delicate foods such as flaky fishes. To use the BBQ Tray, follow these instructions: 1. Remove one of the V-grate grilling grids and place the BBQ Tray into the grill, suspending it from front to back as shown in Figure 9.
Operating the Grill NOTE: The hot grill sears the food, sealing in the juices. The longer preheat period, the faster the meat browns and the darker the sear marks. Place the food on the grill and cook to the desired level. Adjust heat setting, if necessary. The control knob may be set to any position between “HI” and “LO”. DO NOT leave the grill unattended while cooking. • Properly pre-heating the grill. • Ensuring grill grids are properly installed with V-shape up.
Care & Maintenance Tips on Infrared Grilling ALWAYS KEEP THE AREA SURROUNDING THE GRILL FREE FROM ALL COMBUSTIBLE MATERIALS, GASOLINE AND OTHER FLAMMABLE VAPORS AND LIQUIDS. GRILLING GRIDS GRILL BURNERS TO REASSEMBLE THE BURNERS: Routine cleaning of the grill grids is best accomplished by scrubbing the grids with a brass or stainless steel brush immediately before and after cooking, while the grill is hot. Wear a barbeque mitt to protect your hand from the heat while cleaning.
Leak Testing Care of Stainless Steel IMPORTANT NOTE ALWAYS CHECK FOR LEAKS AFTER EVERY L.P. TANK CHANGE GENERAL Although all gas connections on your SOLAIRE INFRARED Grill are leak tested at the factory prior to shipment, a complete gas tightness check must be performed at the installation site due to possible mishandling in shipment, or excessive pressure unknowingly being applied to the unit. Periodically check the whole system for leaks, or immediately check if the smell of gas is detected.
Gas Conversion Natural Gas Hookup GAS CONVERSION REQUIRES A CONVERSION KIT, INCLUDED WITH YOUR GRILL OR AVAILABLE FROM YOUR SOLAIRE DEALER GRILL MODEL AGBQ-27 AGBQ-27XL AGBQ-27XL Rotis PROPANE ORIFICE #59 (1.05mm) #56 (1.22 mm) #66 (.84mm) NATURAL GAS ORIFICE #51 (1.70 mm) #48 (1.95mm) #54 (1.40 mm) TO CONVERT YOUR SOLAIRE GRILL FROM PROPANE TO NATURAL GAS, FOLLOW THESE STEPS: 1. Remove the rear top panel from the Grill; this will give access to the regulator (see drawing below). 2.
L.P. (Propane) Gas Hookup NEVER CONNECT THE GRILL TO AN UNREGULATED GAS SUPPLY. Never connect an unregulated gas line to the appliance. Total gas consumption (per hour) with both burners on “HI”: 27” Grill 27” XL Grill 27” XL Rotisserie 24,000 BTU 32,000 BTU 8,000 BTU The installation of this appliance must conform with local codes or, in the absence of local codes, to the national fuel gas code, ANSI Z223.1a-1988. Installation in Canada must be in accordance with the Standard CAN/ CGA-B149.
Locating & Assembling the Grill Built-in Cutout Details Non-combustible enclosure 26 Grill Cutout A Dimension A Model AGBQ-27 Model AGBQ-27XL Access Doors 87/8 36 35/8 (see note) 37/8 Note: Min. 2” clearance required between edge of cutout and inside back wall of enclosure for gas regulator Combustible enclosure 16 1/4” 21” Dimension B Model IRAD-21 Model IRAD-30 Model IRAD-42 18 1/4” 27 1/4” 39 1/4” SERVICE REQUIREMENTS B Gas Pressure: 4.0” W.C. natural gas 10.0” W.C.
Safety Precautions SAFETY PRACTICES TO AVOID PERSONAL INJURY When properly cared for, your SOLAIRE INFRARED Grill will give safe, reliable service for many years. However, extreme care must be used since the grill produces intense heat, which can increase accident potential. When using this appliance, basic safety practices must be followed, including the following: Read this Care and Use Manual carefully and completely before using your grill to reduce the risk of fire, burn hazard or other injury.
Parts List ITEM No. Table of Contents PART No. DESCRIPTION Model No. 1 2730R Rear Hood 27” AGBQ-27 1 1a 2830R Rear Hood 27”XL AGBQ-27XL 1 HOW TO OBTAIN SERVICE 2 2726R Front Hood 27” AGBQ-27 1 2a 2876R Front Hood 27”XL AGBQ-27XL 1 3 6008R Stander Bracket & phenolic base AGBQ MODELS 2 For service, contact your Solaire 4 6003R 27” hood handle (12” embossing) AGBQ MODELS 1 Infrared Grilling Systems dealer.
Parts List Drawing Thank You for Choosing Solaire � We at Rasmussen Iron Works, Inc., would like to offer our sincere thanks for purchasing a Solaire Infrared Grill. We believe that you are now in possession of one of the finest outdoor cooking appliances ever produced. By carefully following the instructions outlined in this Care & Use Manual you can be assured of years of safe, trouble-free operation and the most succulent grilled foods you have ever experienced.
™ Grill Accessories Ask your Solaire dealer about these and other accessories for your new grill. For more information, visit us on the web at www.solairegrills.com. Steamer/Fryer Stainless Steel Griddle BBQ Tray Wood Chip Smoker Rotisserie Kit Burner Kits Customize your 27” InfraVection Grill with a burner kit that can make your grill all infrared or all conventional. Installation is quick and easy.
