Raspberry Pi TV HAT
Raspberry Pi TV HAT Overview The Raspberry Pi TV HAT allows you to receive digital terrestrial TV broadcast systems, including DVB-T and DVB-T2, on a Raspberry Pi. With the board you can receive and view TV on a Raspberry Pi, or create a TV server that allows you to stream received TV over a network to other devices. The TV HAT can be used with any 40-pin Raspberry Pi board as a server for other devices on the network.
2 Raspberry Pi TV HAT Specifications Sony CXD2880 TV tuner Supported TV standards: DVB-T2, DVB-T Reception frequency: VHF III, UHF IV, UHF V Channel bandwidth: DVB-T2: 1.7MHz, 5MHz, 6MHz, 7MHz, 8MHz DVB-T: 5MHz, 6MHz, 7MHz, 8MHz Environment: Operating temperature 0–50 °C Compliance: For a full list of local and regional product approvals, please visit www.raspberrypi.org/compliance Production lifetime: The Raspberry Pi TV HAT will remain in production until at least January 2023 raspberrypi.
Raspberry Pi TV HAT Physical specifications Warnings This product shall only be connected to a Raspberry Pi computer. This product should be operated only in a well ventilated environment, and if used inside a case, the case should not be covered. This product should be placed on a stable, flat, non-conductive surface while in use, and it should not be in contact with conductive items.
DVB is a registered trademark of the DVB Project Raspberry Pi is a registered trademark of the Raspberry Pi Foundation
