User's Manual

ASSEMBLY
1.1 nstall battery and power
supply
• Put the storage battery into the
battery compartment. Plug the
interface
to the jack.connect the
red terminal and the black termina l
respective ly to the anode
andcathode of battery. (Notice:
make sure they are correctly
connected, red to red,black to
black, otherwise, it will cause
short-circuit.)
• Install the battery locker(?) to the
designated position, and fix it with
2 screws(4)
• Install the battery cover(8) to the
designated position, and fix it with
2 screws(4)
* Replace or take out the storage
battery and power.
Loosen the 2 screws(4) on battery
cover(8)
Unplug the interface and jack,
loosen the 2 screws(4) on battery
locker(?), then the storage battery
can be taken out.
2.1 nstall seat
• Put the seat (3) to the designated
position, fix the front
buckles of
seat to the grooves of car body.
• Press down the button behind the
seat and
lay down the seat, then
release the button and the seat
will be locked. To unlock the seat,
press down the button and raise
the seat.
04
Notice: This seat Is equipped with
seat belt , which is on ly a
decoration to
develop the safety
sense of children, it can not
provide any substantial protection.