» Before the first usage afters long period of being unused, charge the battery by connecting the USB wire to any device with label IND fable Ww and with USE port. Steps are as follows: + Remove the battery Fran the car before charging. Connect the battery io pliant B of the: USE wire, then connect plug A of the USB wire to the power source. The indicator light of the USE wire will tum on and flash tn about seconds (1.5 seconds per flash), which indicates the battery is: being charged normally.
@ @ DIRECTION ADJUSTMENT 7 LED } ae INDICATOR JIN «The fixing piece for chassis can be ‘Used to twist the lock of the battery cover, please see fhe picture on the right See picture 1. «Open the fixed button at the bottonvof:model var according fo the direction of trow; place switch to "OFF" position; pen the battery lid and connect the: interface ‘of battery pack with battery box's power pon then close battery lid.
This product Uses. 2.4GHz communication technology, which is compatible for MIT-device and milch-User, With fast response speed, high response precision, and strong anti-interference capability.
#» Never put the batteries near fire or any source of heat, water ‘or direct sunlight. ws Skin or clothing is to be washed immediately if you make contact with leaked liquid from the battery # For better preservation of rechargeable batteries, please regularly recharge them. Only a charger of the same or equivalent type is recommended to be used.
fi ; AND REPAIR » Remove the batteries when the units notion use for long periods of time. » Clean the vehicle with a: soft cloth. © Avoid being heated or being exposed to strong sunlight. © Keep dry, = Regularly examine USE charging wire foray damage to: its wire, plug. enclosure and other parts; and they must not be used until the damage has been repaired.